High sleeper loft bed in a room with high ceilings, it could be another entire room. In the average home with an 8-foot ceiling, giving it a cozy nest to sleep. The area under the loft bed is then available for use as a study room, a media center with a TV and video games, a play, or even a large closet. An installation high sleeper loft bed is easily accomplished in a weekend.
Measure the corner of the room with a tape measure. You do not need a box spring. Measure out 5 meters from the floor and mark the wall with a pencil. Using a yardstick and a level, draw a horizontal line on the two walls where the high sleeper loft bed will be installed. Using a stud finder, locate the studs and mark the center of each, just above the 5-meter mark.
Screw a 77-inch 2-by-6 board to the rear wall, by means of horizontal line to place the upper side of the board on the wall. Have a helper hold the board in place with the 6-inch edge against the wall, while drilling through it and into the studs. Pre-drill two holes in each end of the remaining 77-inch board, 4/3 inch from the end. Using carriage bolts, attach to the top of the 4-by-4 posts to the side of the board is even with the top of the post. The boards at right angles by two carriage bolts.